Currently Available on eBay
 |
No items matching your keywords were found.
And a selection of products from Amazon
| We did not find any matches for your request. |
Car Stereo Help!! Bose System!! PLZ HELP!?
OK! Long story short, bought a new car, 96 Maxima with a BOSE factory sound system. I bought a new "2/1 Channel Power Amplifier." It is a1200 watt Amp, and two 12'' subs. HOW can I hook it up and keep my BOSE?? The specs on the amp are..(reading off the box, here):
Rated power output: 200W x 2 (4 Ohms)
Max. power output: 1200W (2 Ohms)
Variable Low Pass Filter (50-300Hz, -12dB/Oct.)
High Level Sensing Power On & Low Boost (+10dB)
How can I hook it up to my factory stereo?? PLZ HELP!!
Here is exactly how to wire your amplifier with my step by step instructions:
1. Run the power wire from your positive terminal to the fuse holder, which should be around 1 foot from the main connection. DO NOT PUT THE FUSE IN AT THIS TIME
2. Continue from the fuse holder, through your firewall, into your amplifier.
3. Run the ground wire from your amplifier, to a scratched metal surface that is secure, look for a seat bolt and scratch the paint off of it.
4. Run the RCA cable and Remote wire from the amplifier, to the back of the head unit, you connect the remote wire to the blue or blue/white wire coming from the head unit.
5. Connect your subwoofers and install the fuse, and you are good to go!
And your factory sound system will not be affected in any way since you are not adding an amplifier or any new door speakers to your system.